CP4 failure repair in Phoenix at Floorjack Auto Repair means replacing the whole fuel system when metal has moved, not only the pump. The work happens in our own bays on the I-17 frontage at Happy Valley Road, and Javen Coughlin calls with the price before anything comes off the truck.
What a CP4 failure does to the truck
The Bosch CP4 is on the 2011 to 2016 LML and LGH Duramax, the Ford 6.7 Power Stroke from 2011 and the 2019 and 2020 Ram 6.7 Cummins. The L5P Duramax has a Denso pump. A Duramax LML CP4 failure and the Ford and Ram versions work the same way: fuel is the only lubricant inside a CP4, so a worn pump grinds metal into the fuel and sends it to the rails and injectors at pressure.
Phoenix trucks tow and work through 110-degree afternoons, and a tank run low on a long pull is hard on a pump that is lubricated only by the fuel running through it. The signs are a pressure code such as P0087 or P2291, a hard start, a sudden loss of power and metal in the diesel fuel filter. Metal in the filter means stop driving, because every mile pushes it further in. Wrong fluid in the tank is a separate job, covered on our page about DEF in a diesel tank.
CP4 replacement in Phoenix and the work that comes with it
CP4 pump repair stops at the pump only when the filter and housing are clean. Once metal has moved, a new pump on the old rails and injectors fails the same way, so the list is longer:
- The high-pressure pump.
- A full set of injectors.
- Both fuel rails and the high-pressure lines.
- Fuel filters, with the old one cut open to see what is in it.
- Return lines, flushed or replaced.
- The fuel tank, dropped and cleaned when the truck ran after the failure.
The rest of the diesel list is on our diesel repair across the Valley page.
Contamination kits and complete diesel fuel system replacement
A fuel contamination kit is the parts for this job in one box, split by engine and model year: a 6.7 Power Stroke contamination kit or a kit for the LML Duramax. They usually hold injectors, rails, lines, filters and seals, and the lift pump and tank are usually sold separately.
A kit is parts, not a repair. The fuel contamination kit install has to happen on a clean tank and clean return lines, or the new parts take in what the old ones left. Pumps and injectors are replaced, not repaired.
A 2020 Ford F-350 Super Duty with the 6.7 Power Stroke came to us on a tow truck because it would not start. The factory CP4 had split in half and sent metal through the fuel system. We installed a fuel system contamination kit with OEM injectors and fuel rails, plus an S&S DCR pump. The kit covered the injectors, fuel rails, fuel line assembly, filter kit and the surrounding gaskets. The DCR replaces the CP4, and done before a failure it is our CP4 conversion in Phoenix job.
OEM parts, or aftermarket if you choose
Owners ask about parts on almost every CP4 job, so here is the answer: we use OEM parts. The injectors, fuel rails, filters and seals that go on your truck are the same parts it was built with. If you would rather go aftermarket, we install that too, and you see both prices before you choose.
On a Ford 6.7 Power Stroke the pump we fit is the S&S DCR, an aftermarket pump that replaces the CP4 and comes with its own S&S high-pressure lines. CARB Executive Order D-756-7 covers it on 2011 to 2023 trucks, so the emissions system stays intact. On an LML Duramax or a 2019 or 2020 Ram, we install a CP3 kit in place of the CP4.
CP4 failure repair in Phoenix: what it costs
A California diesel shop’s 2026 estimates put a pump-only replacement at $3,500 to $6,000 when caught before metal spreads, and a complete fuel system replacement at $10,000 to $18,000 after it does. Those are market figures, not our price.
The number depends on how far the metal got. A truck shut off at the first pressure code is a smaller job than one driven home. CP4 failure repair in Phoenix is priced after diagnosis, before anything comes apart, and the price does not move after that. American First Finance splits a bill this size into payments and does not require perfect credit.
Owner Javen Coughlin is ASE Certified, GM-certified and UTI-trained, so Duramax runs deepest here and Duramax repair in Phoenix covers that engine in full. Everything else a diesel needs is on our diesel repair in Phoenix page.